
Global Switch Management Protocol version 3 (GSMPv3) Failure Response Message Name Space 

(last updated 2002-06-10)

Registries included below:
- Failure Response Message Names


Registry Name: Failure Response Message Names
Reference: [RFC3292][ITU-T]
Range          Registration Procedures                  Notes
-------------  ---------------------------------------  ---------   
0-59           IETF Consensus
60-79          Reserved for Vendor Private Extensions  
80-127         IETF Consensus 
128-159        Reserved for Vendor Private Extensions  
160-255        IETF Consensus

Registry:
Value    Failure Response Message Name                               Reference
-------  ----------------------------------------------------------  ---------
0        
1        Unspecified reason not covered by other failure codes.      [RFC3292]
2        Invalid request message.                                    [RFC3292]
3        The specified request is not implemented on this switch.    [RFC3292]
4        One or more of the specified ports does not exist.          [RFC3292]
5        Invalid Port Session Number.                                [RFC3292]
6        One or more of the specified ports is down.                 [RFC3292]
7        Invalid Partition ID.                                       [RFC3292]
8-9      Unassigned
10       General message failure. (The meaning of this               [RFC3292]
         failure code depends upon the Message Type. It is 
         defined within the description of any message that 
         uses it.
11       The specified connection does not exist                     [RFC3292]
12       The specified branch does not exist.                        [RFC3292]
13       One or more of the specified Input Labels is invalid        [RFC3292]
14       One or more of the specified Output Labels is invalid.      [RFC3292]
15       Point-to-point bi-directional connection already exists.    [RFC3292]
16       Invalid service selector field in a connection              [RFC3292]
         management message.
17       Insufficient resources for QoS profile.                     [RFC3292]
18       Insufficient resources.                                     [RFC3292]
19       Out of resources (e.g. memory exhausted, etc.).             [RFC3292]
20       Reservation ID out of Range                                 [RFC3292]
21       Mismatched reservation ports                                [RFC3292]
22       Reservation ID in use                                       [RFC3292]
23       Non-existent reservation ID                                 [RFC3292]
24       ATM virtual path switching is not supported on              [RFC3292]
         this input port.
25       Point-to-multipoint ATM virtual path connections            [RFC3292]
         are not supported on either the requested input 
         port or the requested output port.
26       Attempt to add an ATM virtual path connection               [RFC3292]
         branch to an existing virtual channel connection.
27       Attempt to add an ATM virtual channel connection            [RFC3292]
         branch to an existing virtual path connection. 
28       ATM Virtual Path switching is not supported on              [RFC3292]
         non-ATM ports.
29       A branch belonging to the specified point-to-               [RFC3292]
         multipoint connection is already established on the 
         specified output port and the switch cannot support 
         more than a single branch of any point-to-multipoint 
         connection on the same output port.
30       The limit on the maximum number of point-to-                [RFC3292]
         multipoint connections that the switch can support 
         has been reached.
31       The limit on the maximum number of branches that            [RFC3292]
         the specified point-to-multipoint connection can 
         support has been reached.
32       Cannot label each output branch of a point-to-multipoint    [RFC3292] 
         tree with a different label.
33       Cannot add multi-point branch to bi-directional             [RFC3292]
         connection.
34       Unable to assign the requested Label value to the           [RFC3292]
         requested branch on the specified point-to-multipoint 
         connection.
35       General problem related to the manner in which              [RFC3292]
         point-to-multipoint is supported by the switch.
36       Replace of connection is not activated on switch.           [RFC3292] 
37       Connection replacement mode cannot be combined              [RFC3292] 
         with Bi-directional or Multicast mode.
40       Cannot support one or more requested label ranges.          [RFC3292]
41       Cannot support disjoint label ranges.                       [RFC3292]
42       Specialised multipoint labels not supported.                [RFC3292]
43       The transmit data rate of this output port cannot           [RFC3292]
         be changed.
44       Requested transmit data rate out of range for this          [RFC3292]
         output port.
45       Connection Replace mechanism not supported on switch.       [RFC3292]
46       Labels are still used in the existing Label Range.          [RFC3292]
47-59    Unassigned
60-79    Reserved for Vendor Private Extensions                     [RFC3292]
80       Switch does not support different QoS parameters           [RFC3292]
         for different branches within a multipoint connection.
81-127   Unassigned
128-159  Reserved for Vendor Private Extensions                     [RFC3292]
160-255  Unassigned


References
----------
[ITU-T]    http://www.itu.int/ITU-T/

[RFC3292]  A. Doria, F. Hellstrand, K. Sundell, and T. Worster,
           "General Switch Management Protocol V3", RFC 3292,
           June 2002.

(registry created 2002-03-28)

[]